MITSUBISHI Insert, Turning DCGT11T308-AZ HTi10
Turning Inserts
Non-Coated Carbide, Application Medium Cutting - Finish Cutting, Breaker AZ, Radius 0.8, General Cutting, Cast Iron, Non Ferrous, Hard Material**
| Diameter (Unit) | |
|---|---|
| Name of Grade | Carbide |
| Grade | HTi10 |
| ANSI | DCGT32.52AZ |
| Hand | N |
| Stock |  |
| Unit of Length | M |
| D1 | 4.4 |
| IC | 9.525 |
| EPSR | 55° |
| AN | 7° |
| S | 3.97 |
| RE | 0.8 |
| Breaker | AZ |
| Order Number |
|---|
| DCGT11T308-AZ |
| Diameter (Unit) | ||
|---|---|---|
| IH | insert hand | N |
| CNC | corner count | 2 |
| TC | tolerance class insert | insert tolerance class G |
| WEP | wiper edge property | 0 |
| HAND | hand | neutral (both) hand |
| SC | insert shape code | rhombic 55 degree included angle |
| CECC | cutting edge condition code | sharp |
| CB | chip breaker face count | 1 |
| EPSR | insert included angle | 55 |
| CEDC | cutting edge count | 2 |
| NOI | insert index count | 2 |
| CBP | chip breaker property | 1 |
| SSC | insert seat size code | 11 |
| CTP | coating property | 0 |
| IFS | insert mounting style code | Partly cylindrical, 40-60 deg countersink on one or two sides |
| D1 | fixing hole diameter | 4.4 |
| CBMD | chip breaker manufacturers designation | AZ |
| AN | clearance angle major | 7 |
| IC | inscribed circle diameter | 9.525 |
| RE | corner radius | 0.8 |
| S | insert thickness | 3.97 |
| L | cutting edge length | 11.63 |
Write Review
MITSUBISHI Insert, Turning DCGT11T308-AZ HTi10 Reviews
There are not yet any reviews on this product.