MITSUBISHI Insert, Grooving GY2M0500H040N-GM VP20RT
Turning Inserts
Coated Carbide, Application For Grooving / Cutting Off, Breaker GM, 5.0mm Medium Feed Grooving Insert
| Diameter (Unit) | |
|---|---|
| Name of Grade | Carbide |
| Grade | VP20RT |
| ANSI | GY2M0500H040N-GM |
| Hand | N |
| Stock |  |
| Unit of Length | M |
| CDX | 24.3 |
| L | 25.65 |
| CW | 5 |
| REL | 0.4 |
| RER | 0.4 |
| Breaker | GM |
| Tolerance | REL:±0.05 RER:±0.05 CW:±0.04 L:±0.1 |
| Order Number |
|---|
| GY2M0500H040N-GM |
| Diameter (Unit) | ||
|---|---|---|
| CDX | cutting depth maximum | 24.3 |
| HAND | hand | neutral (both) hand |
| BW | insert body width | 3.2 |
| CECC | cutting edge condition code | rounded |
| CEDC | cutting edge count | 2 |
| NOI | insert index count | 2 |
| IH | insert hand | N |
| WEP | wiper edge property | 0 |
| CBP | chip breaker property | 1 |
| SSC | insert seat size code | H |
| TSYC | tool style code | GY |
| CTP | coating property | 1 |
| CBMD | chip breaker manufacturers designation | GM |
| AN | clearance angle major | 7 |
| CW | cutting width | 5 |
| S | insert thickness | 4.65 |
| INSL | insert length | 26 |
| Diameter (Unit) | |
|---|---|
| Name of Grade | Carbide |
| Grade | VP20RT |
| ANSI | GY2M0500H040N-GM |
| Hand | N |
| Stock | |
| Unit of Length | M |
| CDX | 24.3 |
| L | 25.65 |
| CW | 5 |
| REL | 0.4 |
| RER | 0.4 |
| Breaker | GM |
| Tolerance | REL:±0.05 RER:±0.05 CW:±0.04 L:±0.1 |
Write Review
MITSUBISHI Insert, Grooving GY2M0500H040N-GM VP20RT Reviews
There are not yet any reviews on this product.