MITSUBISHI Boring Bar FCTU120R 20.0mm F Type Boring Bar Screw-On / Clamp-On
Boring
FCTU1 = F Type Boring Bar
Right Hand, 93°, TPxx1603 Type Insert
- 11°positive insert.
- Screw-on type/Clamp-on type
- l/d is 3 to 5 times the diameter.
- 7°positive insert.
| Diameter (Unit) | |
|---|---|
| Hand | R |
| Stock |  |
| Unit of Length | M |
| DMIN | 26 |
| DCON | 20 |
| KAPR | 93° |
| LF | 200 |
| LDRED | 37 |
| WF | 13 |
| H | 18 |
| GAMF | 5 |
| RE | 0.8 |
| Peripheral effective cutting edge count: ZEFP | 1 |
| Insert Number | TP__1603 |
| Order Number |
|---|
| FCTU120R |
| Diameter (Unit) | ||
|---|---|---|
| H | shank height | 18 |
| PSIR | tool lead angle | -3 |
| HAND | hand | right hand |
| SX | shank cross section shape code | round w/ 2 flats - above and below cutting egde |
| OAL | overall length | 200 |
| WF | functional width | 13 |
| DCON | connection diameter machine side | 20 |
| CEATC | tool cutting edge angle type code | Side cutting edge angle |
| CICT | cutting item count | 1 |
| DMIN | minimum bore diameter | 26 |
| LPR | protruding length | 60 |
| BMC | body material code | Steel |
| LF | functional length | 200 |
| MTP | clamping type code | clamp on top of insert |
| LU | usable length | 100 |
| MIID | master insert identification | TPMR160308 |
| DCC | design configuration style code | steel body |
| DCP | data chip provision | 0 |
| GAMF | rake angle radial | 5 |
| GAMP | rake angle axial | 5 |
| TSYC | tool style code | FCTU |
| KAPR | tool cutting edge angle | 93 |
| CNSC | coolant entry style code | without coolant |
| CXSC | coolant exit style code | no coolant exit |
| CUB | connection unit basis | Metric |
| CSP | coolant supply property | 0 |
| FMT | form type | external |
| SIDE | side | machine side |
| RE | corner radius | 0.8 |
Write Review
MITSUBISHI Boring Bar FCTU120R 20.0mm F Type Boring Bar Screw-On / Clamp-On Reviews
There are not yet any reviews on this product.