MITSUBISH Internal Grooving / Threading F Type (FSL5108R) 8mm Ø
Grooving Others
8mm Ø INTERNAL GROOVING / THREADING F TYPE TOOLHOLDER MLG10xxL GROOVING, MLT1001L THREADING INSERTS
FSL51 = F Type Boring Bar
- Min.cutting diameter 10mm.
- Screw-on type
- Usable for various applications.
- Max. depth of groove: 3mm
| Diameter (Unit) | |
|---|---|
| Hand | R |
| Stock |  |
| Unit of Length | M |
| DMIN | 10 |
| DCON | 8 |
| LF | 125 |
| LU | 30 |
| CDX | 1 |
| WF | 4.8 |
| H | 7 |
| CW | 1.2 |
| GAMF | 10 |
| Peripheral effective cutting edge count: ZEFP | 1 |
| Order Number |
|---|
| FSL5108R |
| Diameter (Unit) | ||
|---|---|---|
| CDX | cutting depth maximum | 1 |
| RE | corner radius | 0 |
| H | shank height | 7 |
| HAND | hand | right hand |
| CWN | cutting width minimum | 1.2 |
| CWX | cutting width maximum | 2 |
| SX | shank cross section shape code | round w/ 3 flats - on side, above and below cutting egde |
| OAL | overall length | 125 |
| WF | functional width | 4.8 |
| DCON | connection diameter machine side | 8 |
| CEATC | tool cutting edge angle type code | End cutting edge angle |
| CICT | cutting item count | 1 |
| DMIN | minimum bore diameter | 10 |
| LPR | protruding length | 32 |
| BMC | body material code | Steel |
| LF | functional length | 125 |
| MTP | clamping type code | clamp with screw through hole |
| LU | usable length | 30 |
| MIID | master insert identification | MLG1012L |
| DCC | design configuration style code | steel body |
| DCP | data chip provision | 0 |
| GAMF | rake angle radial | 10 |
| TSYC | tool style code | FSL5 |
| CUB | connection unit basis | Metric |
| CSP | coolant supply property | 0 |
| FMT | form type | external |
| SIDE | side | machine side |
| CNSC | coolant entry style code | without coolant |
| CXSC | coolant exit style code | no coolant exit |
| CW | cutting width | 1.2 |
Write Review
MITSUBISH Internal Grooving / Threading F Type (FSL5108R) 8mm Ø Reviews
There are not yet any reviews on this product.