MITSUBISHI Insert, Turning TPGH160304L-FS HTi10
Turning Inserts
Non-Coated Carbide, Application Finish Cutting, Breaker L-FS, Radius 0.4, Cast Iron, Non-Ferrous, Hard Material**
| Diameter (Unit) | |
|---|---|
| Name of Grade | Carbide |
| Grade | HTi10 |
| ANSI | TPGH321LFS |
| Hand | L |
| Stock |  |
| Unit of Length | M |
| D1 | 4.4 |
| IC | 9.525 |
| B7 | 20 |
| EPSR | 60° |
| GAN | 14° |
| AN | 11° |
| LBB | 2 |
| LE | 6.1 |
| S | 3.18 |
| RE | 0.4 |
| Breaker | L-FS |
| Order Number |
|---|
| TPGH160304L-FS |
| Diameter (Unit) | ||
|---|---|---|
| IH | insert hand | L |
| CNC | corner count | 3 |
| TC | tolerance class insert | insert tolerance class G |
| WEP | wiper edge property | 0 |
| HAND | hand | left hand |
| SC | insert shape code | triangular 60 degree included angle |
| CECC | cutting edge condition code | sharp |
| CB | chip breaker face count | 1 |
| EPSR | insert included angle | 60 |
| CEDC | cutting edge count | 3 |
| NOI | insert index count | 3 |
| CBP | chip breaker property | 1 |
| SSC | insert seat size code | 16 |
| CTP | coating property | 0 |
| AN | clearance angle major | 11 |
| IFS | insert mounting style code | Partly cylindrical, 70-90 deg countersink on one or two sides |
| D1 | fixing hole diameter | 4.4 |
| CBMD | chip breaker manufacturers designation | FS |
| L | cutting edge length | 16.5 |
| IC | inscribed circle diameter | 9.525 |
| RE | corner radius | 0.4 |
| S | insert thickness | 3.18 |
| LE | cutting edge effective length | 6.1 |
Write Review
MITSUBISHI Insert, Turning TPGH160304L-FS HTi10 Reviews
There are not yet any reviews on this product.