MITSUBISHI Boring Bar A20QPTFNR16 20.0mm P Type Boring Bar Lever Lock
Boring
PTFN = P Type Boring Bar
TNxx16 Type Insert
- ISO standard.
- Economical negative insert.
- Lever lock type.
- l/d is 3 times the diameter.
| Diameter (Unit) | |
|---|---|
| Hand | R |
| Stock |  |
| Unit of Length | M |
| DMIN | 25 |
| DCON | 20 |
| KAPR | 91° |
| LF | 180 |
| LDRED | 32 |
| WF | 13 |
| H | 18 |
| GAMF | 15 |
| RE | 0.8 |
| Peripheral effective cutting edge count: ZEFP | 1 |
| Insert Number | TN__1604 |
| Order Number |
|---|
| A20QPTFNR16 |
| Diameter (Unit) | ||
|---|---|---|
| H | shank height | 18 |
| PSIR | tool lead angle | -1 |
| HAND | hand | right hand |
| SX | shank cross section shape code | round w/ 3 flats - on side, above and below cutting egde |
| OAL | overall length | 180 |
| WF | functional width | 13 |
| DCON | connection diameter machine side | 20 |
| CEATC | tool cutting edge angle type code | Side cutting edge angle |
| CICT | cutting item count | 1 |
| DMIN | minimum bore diameter | 25 |
| LPR | protruding length | 60 |
| BMC | body material code | Steel |
| LF | functional length | 180 |
| MTP | clamping type code | clamp with pin through hole |
| LU | usable length | 60 |
| MIID | master insert identification | TNMG160408 |
| DCC | design configuration style code | steel body with internal coolant supply |
| DCP | data chip provision | 0 |
| GAMF | rake angle radial | 15 |
| GAMP | rake angle axial | -6 |
| TSYC | tool style code | PTFN |
| KAPR | tool cutting edge angle | 91 |
| CUB | connection unit basis | Metric |
| CSP | coolant supply property | 1 |
| FMT | form type | external |
| SIDE | side | machine side |
| CNSC | coolant entry style code | axial concentric entry |
| CXSC | coolant exit style code | axial inclined exit |
| RE | corner radius | 0.8 |
Write Review
MITSUBISHI Boring Bar A20QPTFNR16 20.0mm P Type Boring Bar Lever Lock Reviews
There are not yet any reviews on this product.