MITSUBISHI Indexable Drill STAWMN1400S16 5.0mm id STAW Drill 117.5mm OAL
Drills
STAW = Small Diameter Indexable Drill
- Wavy cutting edge design for good chip control.
- Highly rigid clamping system offers stability and reliability for small hole drilling.
| Diameter (Unit) | |
|---|---|
| Stock |  |
| Unit of Length | M |
| DCON | 16 |
| SIG | 140° |
| LF | 145 |
| OAL | 147.5 |
| LH | 99.5 |
| LBX | 85.5 |
| ld | 5 |
| Cutting item count: CICT | 1 |
| Effective Cutting Edge | 2 |
| Type of Coolant | Internal |
| Order Number |
|---|
| STAWMN1400S16 |
| Diameter (Unit) | ||
|---|---|---|
| ZEFF | face effective cutting edge count | 2 |
| DCON | connection diameter machine side | 16 |
| ULDR | usable length diameter ratio | 5 |
| CICT | cutting item count | 1 |
| HAND | hand | right hand |
| LPR | protruding length | 99.5 |
| BMC | body material code | Steel |
| LF | functional length | 120.5 |
| DC | cutting diameter | 14 |
| LS | shank length | 48 |
| MTP | clamping type code | clamp with screw through hole |
| LU | usable length | 72.5 |
| ZNF | face mounted insert count | 1 |
| MIID | master insert identification | STAWN1400TH |
| NOF | flute count | 2 |
| DCP | data chip provision | 0 |
| OAL | overall length | 147.5 |
| LUX | usable length maximum | 85.5 |
| TSYC | tool style code | STAW |
| SIG | point angle | 140 |
| PL | point length | 2.6 |
| CUB | connection unit basis | Metric |
| CSP | coolant supply property | 1 |
| FMT | form type | external |
| SIDE | side | machine side |
| CNSC | coolant entry style code | axial concentric entry |
| CXSC | coolant exit style code | axial inclined exit |
| FDC | flute design code | spiral (helical) chip flute |
| LCF | length chip flute | 93 |
| FHH | flute helix hand | right hand flute |
Write Review
MITSUBISHI Indexable Drill STAWMN1400S16 5.0mm id STAW Drill 117.5mm OAL Reviews
There are not yet any reviews on this product.