MITSUBISHI Indexable Drill STAWLN1500S20 8.0mm id STAW Drill 200.7mm OAL
Drill -STAW(Small Diameter Indexable Drill)
15.0-15.4mm X 8D Small Ø Indexable Drill (200.7 OAL)
- Wavy cutting edge design for good chip control.
- Highly rigid clamping system offers stability and reliability for small hole drilling.
STAWN1500- STAWN1540 Insert
| Diameter (Unit) | |
|---|---|
| Stock |  |
| Unit of Length | M |
| DCON | 20 |
| SIG | 140° |
| LF | 198 |
| OAL | 200.7 |
| LH | 150.7 |
| LBX | 132.7 |
| ld | 8 |
| Cutting item count: CICT | 1 |
| Effective Cutting Edge | 2 |
| Type of Coolant | Internal |
| Order Number |
|---|
| STAWLN1500S20 |
| Diameter (Unit) | ||
|---|---|---|
| ZEFF | face effective cutting edge count | 2 |
| DCON | connection diameter machine side | 20 |
| ULDR | usable length diameter ratio | 8 |
| CICT | cutting item count | 1 |
| HAND | hand | right hand |
| LPR | protruding length | 150.7 |
| BMC | body material code | Steel |
| LF | functional length | 173.5 |
| DC | cutting diameter | 15 |
| LS | shank length | 50 |
| MTP | clamping type code | clamp with screw through hole |
| LU | usable length | 122.8 |
| ZNF | face mounted insert count | 1 |
| MIID | master insert identification | STAWN1500TH |
| NOF | flute count | 2 |
| DCP | data chip provision | 0 |
| OAL | overall length | 200.7 |
| LUX | usable length maximum | 132.7 |
| TSYC | tool style code | STAW |
| SIG | point angle | 140 |
| PL | point length | 2.7 |
| CUB | connection unit basis | Metric |
| CSP | coolant supply property | 1 |
| FMT | form type | external |
| SIDE | side | machine side |
| FDC | flute design code | spiral (helical) chip flute |
| LCF | length chip flute | 146.7 |
| FHH | flute helix hand | right hand flute |
| CNSC | coolant entry style code | axial concentric entry |
| CXSC | coolant exit style code | axial inclined exit |
Write Review
MITSUBISHI Indexable Drill STAWLN1500S20 8.0mm id STAW Drill 200.7mm OAL Reviews
There are not yet any reviews on this product.